Municipal Salt Spreaders

WE OFFER SPREADERS OF MANY TYPES AND SIZES. SEE AN EXAMPLE BELOW

3, 4 and 4.5 Yard Stainless Steel Salt & Sand Spreaders

IDEAL FOR HEAVY DUTY MUNICIPAL & COMMERCIAL APPLICATIONS.
Gas Engine or Hydraulic Drive
Designed for dump bodies & flat bodies with a GVW chassis of 15,000 to 20,000 lbs. and is available with either hydraulic motor drive or 10-1/2 HP gas engine.
GENERAL:
• Self-contained hopper.
• Spreads free flowing materials sand and/or salt.
• Spread width of 4' to 30'.
MATERIAL HOPPER:
• 12 gauge 304 stainless steel with continuously welded seams.
• All hopper sides are formed with a continuous "J" channel profile for added rigidity and strength. Six (6) 12 gauge body gussets.
• Optimum material feed is maintained by hopper side walls sloped at 45°.
• Heavy-duty 4-section hinged top grate is standard. Bars are 1/4" diameter located on 3" center grid.
• Built-in four corner lift points.
CONVEYOR:
• 12-1/2" wide, all steel pintle chain conveyor with 1/4" x 1" crossbars on 4-5/8" centers.
• Replaceable 10 gauge stainless steel chain shields.
•Replaceable 10 gauge stainless steel conveyor floor.
• 10 gauge stainless steel inverted "V".
• Conveyor driven by 20:1 ratio worm gearbox utilizing tapered bearings.
• Conveyor chain is adjustable for chain take up, providing optimum performance and drive life.
• Chain drive and idler sprockets are 6-tooth cast sprockets keyed to 1-1/4" shafts.
• Conveyor chain wiper minimizes waste.
SPINNER ASSEMBLY:
• Spinner chute has two adjustable internal baffles.
• Four (4) external baffles (3 adjustable, 1 fixed).
• 18" x 3/4" thick polyurethane spinner disc.
• Hydraulic model's chute utilizes four (4) spring loaded stainless steel quick detach pins for ease of: material unloading, tow hitch access and storage.
• Bolt-on spinner housing minimizes replacement cost.
POWER SOURCE:
• Hydraulic Drive: Two independent hydraulic motors (15 GPM @ 1,500 PSI).
• Gas Engine: 10.5 horsepower Briggs & Stratton.
OPTIONAL EQUIPMENT:
• Nylon strap mounting kit.
• Tailgate latch kit.
• Liquid spray system, electric.
• Stainless steel D.O.T. spreader lightbar. 
DIMENSIONS:
• 4 cu. yd. -- Overall length, 108"; Width, 70"; Height, 45"; Recommended use, dump bodies and flat beds with a GVW chassis of 15,000 to 20,000 lbs.
• 4-1/2 cu. yd. -- Overall length, 120"; Width, 70"; Height, 45"; Recommended use, dump bodies and flat beds with a GVW chassis of 15,000 to 20,000 lbs.

Part No.

Description

Weight

1400475SS

3 cu. yd. 96" Stainless Steel Hopper Spreader Kit, Gas Engine

1,400 lbs. 

1400500SS

4 cu. yd. 108" Stainless Steel Hopper Spreader Kit, Gas Engine

1,500 lbs. 

1400500SSH

4 cu. yd. 108" Stainless Steel Hopper Spreader Kit, Hydraulic Drive

1,435 lbs. 

1400550SS

4.5 cu. yd. 120" Stainless Steel Hopper Spreader Kit, Gas Engine

1,560 lbs. 

1400550SSH

4.5cu. yd. 120" Stainless Steel Hopper Spreader Kit, Hydraulic Drive

1,500 lbs. 

LS1

12-Volt Liquid Spray System, Cab Control, Poly Reservoir, 55 gal.

148 lbs.

LB8663SST*

Stainless Steel D.O.T. Spreader Lightbar, 9-Hole Round (8"x3"x66")

28 lbs.

3008560

Hopper Spreader Tailgate Lock Kit

40 lbs.

1496505

Nylon Ratchet Strap Mounting Kit

9 lbs.

* Lights/wiring not included.



7, 8, & 9 cubic yard stainless steel Salt & Sand Spreaders

IDEAL FOR HEAVY DUTY MUNICIPAL & COMMERCIAL APPLICATIONS.
Designed for municipalities and contractors with a minimum 26,000 lbs. GVW chassis.
GENERAL:
• Self-contained hopper.
• Spreads free flowing materials sand and/or salt.
• Spread width of 4’ to 40’.
MATERIAL HOPPER:
• 7-gauge 304 stainless steel cross members.
• 10-gauge 304 stainless steel, long sills with rear enclosure & integral chain shields.
• 10-gauge 304 stainless steel replaceable floor.
• 10-gauge 304 stainless steel sides (continuously welded seams), gussets and rear panel.
• 10-gauge 304 stainless steel front panel.
• Four (4) 5/8” thick lift points.
FEEDGATE:
• 10-gauge, 304 stainless steel with scaled screw jack adjustment.
• 18-5/8” wide x 10” tall opening.
CONVEYOR:
• 24" wide, pintle chain conveyor with 3/8” thick x 1-1/2” wide crossbars on 4-1/2” centers (667X Pitch).
• 2" diameter drive shaft with 4-bolt relubeable bearing.
• 8-tooth cast iron sprockets.
• 50:1 or 25:1 direct-drive gearbox with extended through-shaft for ground speed sensor.
• 1-1/2” diameter idler shaft with 4” adjustable range relubeable bearing.
• Conveyor chain wiper made of belted rubber minimizes waste.
STANDARD INSTALLED EQUIPMENT:
• 4-section hinged top grate screens. 3/8" diameter bar on 3" centers with 1/4" x 2" x 2" angle iron frame. Hinged to 6" horizontal crossbeam.
• 10-gauge, 304 stainless steel inverted “V” prevents material compaction and reduces wear on drive train components.
CHUTE/SPINNER ASSEMBLY:
• 10-gauge, 304 stainless steel laser cut parts with smooth radius corners.
• Telescopic adjustment in 3” increments to accommodate varying body mounting heights.
• Two (2) adjustable, internal baffles direct material to 20” diameter x 5/8" thick, 6-fin poly spinner disc.
• Three (3) adjustable external and one (1) fixed deflector with overlapping corners provide a precision spread pattern.
• Top-mounted, direct-drive hydraulic spinner motor provides better ground clearance and corrosion protection.
• Two (2) stainless steel spring latches quick release hinged chute for bulk material unloading and convenient ground storage.
POWER SOURCE:
• Hydraulic Drive: Two independent direct drive hydraulic motors (17 GPM @ 1,500 PSI).
OPTIONAL EQUIPMENT:
• Dump Body Tailgate Latch Kit (Part # 3008560).
• DOT Spreader Lightbar (Part # LB8663SST). 8" Tall x 66" Long x 3" Deep stainless steel lightbar includes 9 mounting holes for 4” recessed stop-turn-taillights-strobes and 2-1/2" marker lights.
• Liquid Spray System (Part # LS4), 104 Gallons.
• Tie-Down Kit (Part # 3010548).
DIMENSIONS:
• Hopper length, 120”; Overall length, 143"; Width, 82”
• Recommended use, dump bodies and flat beds with a minimum 26,000 lbs. GVW chassis.

Part No.

Drive

Gearbox Ratio

Cubic Yards
(level)

Cubic Yards
(rounded)

Side Height

Weight

1450757SSH

Hydraulic

50:1

7

8.3

57

2,310 lbs.

1425757SSH

Hydraulic

25:1

7

8.3

57

2,310 lbs.

1450863SSH

Hydraulic

50:1

8.3

9.6

63

2,457 lbs.

1425863SSH

Hydraulic

25:1

8.3

9.6

63

2,457 lbs.

1450969SSH

Hydraulic

50:1

9.6

12.2

69

2,550 lbs.

1425969SSH

Hydraulic

25:1

9.6

12.2

69

2,550 lbs.



10-16 CUBIC YARD STAINLESS STEEL SALT & SAND SPREADERS

IDEAL FOR HEAVY DUTY MUNICIPAL & COMMERCIAL APPLICATIONS.1421569SSH
Designed for municipalities and contractors with a minimum 34,000 lbs. GVW chassis.
GENERAL:
Self-contained hopper.
Spreads free flowing materials sand and/or salt.
Spread width of 4' to 40'.
MATERIAL HOPPER:
7-gauge 304 stainless steel cross members.
10-gauge 304 stainless steel, long sills with rear enclosure & integral chain shields.
10-gauge 304 stainless steel replaceable floor.
10-gauge 304 stainless steel sides (continuously welded seams), gussets and rear panel.
10-gauge 304 stainless steel front panel.
Four (4) 5/8" thick lift points.
FEEDGATE:
10-gauge, 304 stainless steel with scaled driver side screw jack adjustment.
18-5/8" wide x 10" tall opening.
CONVEYOR:
24" wide pintle chain conveyor with 3/8" thick x 1½" wide crossbars on 4½" centers (667X Pitch), 21,000 PSI/Strand.
2" diameter drive shaft with 4-bolt relubeable bearing.
8-tooth cast iron sprockets.
50:1 or 25:1 direct-drive gearbox with extended through-shaft for ground speed sensor.
1½" diameter idler shaft with 4" adjustable range relubeable bearing.
Conveyor chain wiper made of belted rubber minimizes waste.
STANDARD INSTALLED EQUIPMENT:
4-section hinged top grate screens. 3/8" diameter bar on 3" centers with Ό" x 2" x 2" angle iron frame.
Hinged to 6" horizontal crossbeam.
10-gauge, 304 stainless steel inverted "V" prevents material compaction and reduces wear on drive train components.
CHUTE/SPINNER ASSEMBLY:
10-gauge, 304 stainless steel laser cut parts with smooth radius corners.
4 telescopic adjustments in 3" increments to accommodate varying body mounting heights. 25.7" to 38.5" min/max adjustment below longsills.
Two (2) adjustable, internal baffles direct material to 20" diameter x 5/8" thick, 6-fin poly spinner disc.
Three (3) adjustable external and one (1) fixed deflector with overlapping corners provide a precision spread pattern.
Bottom-mounted, direct-drive hydraulic spinner motor provides exceptional spread pattern.
Two (2) stainless steel spring latches quick release hinged chute for bulk material unloading and convenient ground storage.
POWER SOURCE:
Hydraulic Drive: Two independent direct drive hydraulic motors (17 GPM @ 1,500 PSI).
OPTIONAL EQUIPMENT:
Dump Body Tailgate Latch Kit.
DOT Spreader Lightbar. 8" Tall x 66" Long x 3" Deep stainless steel lightbar includes 9 mounting holes for 4" recessed stop
turn-taillights-strobes and 2-1/2" marker lights.
Light bar kit includes: Wire Harness, (2) LED STT lights,
(2) LED Backup lights, (2) LED Strobe lights, (3) LED Marker lights, (2) LED Load Equalizers.
Buyers Products Company reserves the right to change material, dimension and/or component specifications without notice.

Spreaders - 34,000 lb. to 38,000 lb. GVW chassis

Hopper Length: 144"; Overall Length: 167"; Width: 82"

Part No.

Drive

Gearbox Ratio

Cubic Yards
(level)

Cubic Yards
(rounded)

Side Height

Weight

1451057SSH

Hydraulic

50:1

8.76

10

57"

2990 lbs.

1421057SSH

Hydraulic

25:1

8.76

10

57"

2990 lbs.

1451163SSH

Hydraulic

50:1

10.28

11.82

63"

3155 lbs.

1421163SSH

Hydraulic

25:1

10.28

11.82

63"

3155 lbs.

1451369SSH

Hydraulic

50:1

11.82

13.59

69"

3260 lbs.

1421369SSH

Hydraulic

25:1

11.82

13.59

69"

3260 lbs.

 

Spreaders - 48,000 lb. to 60,000 lb. GVW chassis

Hopper Length: 168"; Overall Length: 191"; Width: 82"

Part No.

Drive

Gearbox Ratio

Cubic Yards
(level)

Cubic Yards
(rounded)

Side Height

Weight

1451257SSH

Hydraulic

50:1

10.22

11.75

57"

3570 lbs.

1421257SSH

Hydraulic

25:1

10.22

11.75

57"

3570 lbs.

1451363SSH

Hydraulic

50:1

12

13.8

63"

3930 lbs.

1421363SSH

Hydraulic

25:1

12

13.8

63"

3930 lbs.

1451469SSH

Hydraulic

50:1

13.8

15.87

69"

4040 lbs.

1421469SSH

Hydraulic

25:1

13.8

15.87

69"

4040 lbs.

 

 


Back

Holland Equipment Co.     2870 West 2100 South - SLC, UT 84119 - (801) 972-1601 - (800) 234-8611 - FAX (801) 972-6730
HOME